High-Speed Digital Design
Course Description
This practical workshop covers the important and
timely issues in high-speed digital design
and signal integrity. Developed specifically
for engineers and designers who work with
high-speed digital signals, this workshop
will give you the power to instantly
recognize and solve many of today’s
high-speed design problems.
course description
|
|
Advanced High-Speed Signal Propagation
Course Description
This is an advanced-level course for
experienced digital designers who want to
press their designs to the upper limits of
speed and distance. Focusing on lossy
transmission environments like backplanes, cables
and long on-chip interconnections, this course teaches a unified
theory of transmission impairments that
apply to any transmission media.
course description |
|
High-Speed Noise and Grounding
Course Description
This 2-day class focuses on mixed-signal
applications involving high-speed digital
electronics used in conjunction with
sensitive analog circuits such as radio
receivers, GPS devices and cell phones. This
course addresses the critical issues of
noise and grounding that are seen in many
advanced signal processing applications
today, including avionics, telemetry and
guidance systems.
course description |
Dates
October 27 - 28 (SOLD
OUT)
Tuition
$1395
|
Dates
October 29 - 30, (SOLD
OUT)
Tuition
$1395
|
Dates
November 3 - 4 (Mon - Tues)
Tuition
$1395
|
|
REGISTER NOW
See
full
schedule of classes here.
Location
Embassy Suites Milpitas
901 E Calaveras Blvd
Milpitas, CA 95035
Ph: 408-942-0400
Fax: 408-262-8604
Time
8:30 am to 5:00 pm Day 1
8:30 am to 4:00 pm Day 2
Lunch will be served 12:00 to 1:00 both days
Check-In
7:30 am to 8:30 am Day 1
A continental breakfast will be available
Accommodations
Stay at the
Embassy Suites
and beat the morning traffic! To reserve a
room, call the hotel at 408-942-0400.
Directions
From I-880 - Take the Exit 237-Calaveras and
travel east approximately two miles to Hillview Dr. Turn left onto Hillview and
right onto Hillview Court into hotel parking
lot. From I-680 - Take Exit 237-Calaveras
and travel west one block. The hotel is on
the right. From Hwy 101 Southbound and Hwy
101 Northbound (after passing downtown San
Jose) - Take Exit 237-Alviso to Milpitas.
Travel east on 237 for 9-10 miles to
Hillview Dr. Turn left onto Hillview and
right onto Hillview Court into hotel parking
lot. From Hwy 101 northbound (before
reaching San Jose) - Take Hwy 680 North to
the Hwy 237-Calaveras Blvd. exit. West on
Calaveras Blvd. one block. Hotel entrance is
on the right.
REGISTER NOW -
take one, two or all three classes!
|
